Stories. Questions. Different perspectives.
Browse WAURE
← Explore
Travel ·

The bus USB port melted the end of my charging cable

Travel category photographTravel

I smelled hot plastic and found the end of my charging cable softened inside the bus USB port.

I unplugged my phone, but part of the connector appears stuck and the port is still lit. My friend wants to pull the fragment out with a key before another passenger uses it.

We should keep hands and objects away from the port and alert the driver or attendant at the next safe opportunity using the onboard communication process. Staff can isolate power to the outlet or seat, mark it out of service, and arrange inspection. Metal tools near a possibly energized damaged port create another risk.

We should not reconnect the phone, test another cable, pour anything on the port, cover it with fabric, or try to remove the fragment. If there is smoke, sparking, or increasing heat, we should move away and notify staff immediately rather than waiting for a scheduled stop.

My friend says the cable was cheap and probably caused the problem. That may be part of the investigation, but the lit port with material inside still needs to be taken out of service.

I can preserve the damaged cable separately after it cools and note the seat and time. Replacement cost can be discussed after the electrical condition is controlled.

Would you change seats or move farther away until staff isolate the port?

Discussion

4 community replies

Keep away from the damaged port and notify bus staff; do not use metal tools, another cable, fabric, or liquid on it.

Bus staff should close and inspect the outlet; move away immediately if heat, smoke, or sparking increases.

Is the port still lit or hot, is there smoke or sparking, what seat is involved, and can staff isolate its power?

The cable itself may have failed, but material stuck in an energized port still creates a separate equipment problem.

Join the discussion

0 reader replies

More in Travel

Explore more Travel stories →